Choose cycling bibs by the chamois first and the fit second. Look for a shaped, multi density pad that puts its firmest support under your sit bones, not simply the thickest pad you can find. Then judge the fit in your riding position: snug everywhere with no loose fabric, straps that hold with light tension when you lean forward, and leg grippers that stay put without digging in. Use the Enjoy sizing chart (height, weight, and garment measurements, sizes XS through 2XL). Our official sizing rule is simple: if you are new to Enjoy, size up. Get those right and the rest (color, pockets, logo) is up to you.

Bibs vs regular cycling shorts

Bibs swap the waistband for over the shoulder straps. That design is better at keeping the chamois in place, it does not dig in at the waist when you are bent over the bars, and it covers your lower back if your jersey rides up. The tradeoff is the bathroom stop, since the straps sit under your jersey.

For most road riders, those advantages make bibs worth it. Every pair in our bib lineup uses the strap design.

Start with the chamois

The chamois (the pad) does most of the work in a pair of bibs. It is the feature responsible for most of your comfort on the bike.

Density and shape beat thickness

A thicker pad is not automatically better. A pad that is too thick can increase rubbing and pressure. What matters is:

  • Multi density construction, with firmer support under the sit bones, where most of your weight goes
  • Anatomical shape that matches your contact with the saddle
  • Minimal seams around the pad, so nothing rubs on long rides
  • Breathable, quick drying top fabric, so sweat does not sit against your skin

What the product pages say about our pads

Several of our bibs use pads from Elastic Interface:

How bibs should fit

Bibs should fit closer than anything else in your kit. Loose fabric moves, and moving fabric rubs. But compression is not restriction.

The on-the-bike fit check

Bibs are cut for a rider leaning forward, so they often feel short or firm standing up. Pull them all the way up, then get into your riding position (hands on the hoods, back flat) and check:

  1. 1. Chamois: it sits flat against you with no folds or gaps, and the thickest part lands under your sit bones.
  2. 2. Straps: they hold the bibs up with light tension. They should not dig in or slide off your shoulders.
  3. 3. Legs: the grippers stay put. A small, smooth line is normal. A deep groove or a bulge above the gripper means too tight.
  4. 4. Waist and back: no gap at the lower back.
  5. 5. Fabric: close to the skin everywhere, no baggy spots.

Our refund policy covers exchanges within 7 days of delivery on unworn, unwashed kit with tags on. Exchanges are free. Do the fit check at home and skip the test ride until you are sure.

Too small or too big?

Too small: straps pull sharply, fabric looks stretched or see through, leg bands are painful or cause numbness, or the chamois feels pulled up into you.

Too big: fabric wrinkles around the pad, straps feel loose, the chamois moves on its own, or the legs ride up while you pedal.

Straps, leg grippers and fabric

  • Straps: wide, flat straps spread pressure across your shoulders. The Big E Bibs use a traditional strap design, which the product page describes as distributing tension evenly and preventing the bibs from moving up while you pedal.
  • Leg grippers: they keep the legs and pad from creeping. Our bibs use a silicone hem gripper.
  • Seams: flat lock seams reduce pressure lines and irritation. Ours are flat locked.
  • Fabric: Enjoy bib product pages list an Italian recycled polyamide main body with Lycra Power panels. The Pro Bib in Black is listed with high compression fabric, and the Big E Bibs use a textured red wine shell.
Back view of Enjoy Big E bibs showing the chamois area and back straps

How to pick your Enjoy bib size

Our sizing chart lists height, weight, half waist, half leg, half hip and inseam for every bib size, XS through 2XL. Garments are measured flat and by hand, so allow 1 to 2 cm either way.

  1. 1. Start with height and weight. Measure height with shoes off, back to a wall. Find the size where both land. If they split, go with weight.
  2. 2. Check bibs you already love. Lay them flat. Measure straight across the waist and the leg opening, then the inseam, and compare to the bib chart.
  3. 3. Know the rule. If you are new to Enjoy, size up. That is our official sizing rule. Our Pro Tech bibs and Pro Light bibs are listed as slim or race fit, and those product pages recommend sizing up unless you already know how Enjoy fits you.

Still unsure? Email hello@enjoycyclingclub.com with your height, weight and the bibs you are looking at.

Which Enjoy bibs to start with

Here is what the product pages actually say, without assigning a ride type the pages do not:

  • The Big E Bibs in Red Wine, $215, are built around traditional straps and an elastic edged Elastic Interface chamois. The product page describes them for practical daily training and weekend distance.
  • The Enjoy Pro Bib in Olive, $215, is listed with the Elastic Interface HP Paris pad.
  • The Enjoy Pro Bib in Black, $225, is listed with high compression fabric and an Elastic Interface pad.

Want to see the full lineup? Browse the bibs collection.

Care: make your chamois last

Our care label is simple: cold wash, inside out, no fabric softener, hang dry. Do not tumble dry.

FAQ

Do you wear underwear with cycling bibs?

No. The chamois is designed to sit directly against your skin. Underwear adds seams and fabric that trap moisture and cause friction, which is exactly what the pad is there to prevent.

How tight should cycling bibs be?

Snug like a second skin, with no loose fabric around the chamois, but never so tight that the leg grippers cause numbness, the straps dig in when you are leaning forward, or the fabric turns see through. Judge the fit in your riding position, not standing up.

Is a thicker chamois better?

Not necessarily. A pad that is too thick can increase rubbing and pressure. Shape, multi density support under the sit bones, and how well the pad matches your position matter more than thickness.

Are bibs better than regular cycling shorts?

For most road riders, yes. Bibs hold the chamois in place better, do not dig in at the waist when you are bent over the bars, and keep your lower back covered. The main downside is bathroom breaks.

Should I size up or down in Enjoy bibs?

If you are new to Enjoy, size up. That is our official sizing rule. Start with height and weight on the sizing chart, and if those split, go with weight. Once you know how our bibs fit you, fine tune from there. Pro Tech and Pro Light bibs are listed as slim or race fit, and those pages recommend sizing up unless you already know the cut.

How should I wash cycling bibs?

Cold wash, inside out, no fabric softener, hang dry. Do not tumble dry.

What chamois do Enjoy bibs use?

Several Enjoy bibs use Elastic Interface pads. The Pro Bib in Olive is listed with the HP Paris pad. The Pro Bib in Black, the Big E Bibs, and the Pro Light Bib are listed with an Elastic Interface pad. The exact pad model is listed on each product page.

Find your next pair

Chamois sorted, fit checked, size picked. Shop Enjoy bibs and find the pair that matches your ride. Exchanges are free within 7 days of delivery if the size is off (unworn, unwashed, tags on).

Enjoy the ride.